Redefining Evolution in Reusable Launch Vehicles: Advancements and Innovations
Keywords:
Propellant; Propulsion; Aero dynamics; Pay load; SSTO; TSTO; Optimal flight control; Alkali metal thermo electric converter; Time varying sliding mode control (TVSMC); IVHM; Rocket based combined cycle (RBCC); BoosterAbstract
With the help of the phrases "conserve," "reuse," and "reproduce," today's society is attempting to have an impact on reducing the overuse of finite resources, shortening turnaround times, lowering costs, and raising product efficiency. The creation of The Reusable Launch Vehicle, often known as the RLV, is one of technology's largest breakthroughs or innovations at work. The primary criterion for this vehicle is reusability. After completing its mission, the vehicle will return to Earth and be employed for more missions. This idea primarily uses fewer resources to accomplish the desired goals while saving money and time.
Scientists first began to consider RLVs in the 1950s, but it took many years before they could be realised because the technology at the time couldn't handle the concept.The way was being opened up for the successful creation of this launch vehicle as technology advanced.The low weight construction, heat shield, propellants that would need to be used, engines, etc. were just a few of the variables that needed to be taken into account. However, the major goal of this article is to explain the idea behind how it works and to develop a correct design.With the development of ever-improving technology, RLVs with the below-mentioned better mechanisms like SSTO and TSTO were created. These RLVs will soon totally close the space between the earth and the sky.
References
Freeman Jr DC, Stanley DO, Camarda CJ, Lepsch RA, Cook SA (1995) Single-stage-to-orbit-A step closer. Acta Astronaut 37: 87-94.
Kaplan MH (2002) Reusable launch vehicle facts and fantasies. AIP Conf Proc 608: 1181-1185.
Freeman Jr DC, Talay TA, Austin RE (1997) Reusable launch vehicle technology program. Acta Astronaut 41: 777-790.
Bond WH, Yi AC (1994) Air liquefaction and enrichment system propulsion in reusable launch vehicles. J Propul Power 10: 485-491.
Blosser ML (1997) Development of metallic thermal protection systems for the reusable launch vehicle. AIP Conf Proc 387: 1125-1144.
Kamran D (2001) Thermal Analysis and Design of Multi-Layer Insulation for Re-Entry Aerodynamic Heating.
Behrens B, Muller M (2004) Technologies for thermal protection systems applied on re-usable launcher. Acta Astronaut 55: 529-536.
Paul TV, Kathryn WE, Korte JJ, Roger LA (2002) Multidisciplinary analysis of a lifting body launch vehicle. J Spacecraft Rockets 39: 788-795.
Varvill R, Bond A (2003) A Comparison of Propulsion Concepts for SSTO Reusable Launchers. JBIS 56: 108-117.
Whitehead JC (1996) Single stage to orbit mass budgets derived from propellant density and specific impulse.
Verstraete D, Hendrick P, Pilidis P, Ramsden K (2010) Hydrogen fuel tanks for subsonic transport aircraft. Int J Hydrogen Energ 35: 11085-11098.
Mark BG (1990) Design synthesis of Shuttle-class hypersonic SSTO vehicle. AIAA Aerospace Sciences Meeting, NV, USA.
Mark VBA, Kenneth MD (1989) Minimum-Fuel Ascent to Orbit using Air- Breathing Propulsion. American Control Conference, USA.
Froning Jr HD (1989) Investigation of very high energy rockets for future SSTO vehicles. Acta Astronaut 19: 321-330.
Marc BA (2004) Performance Study of Two-Stage-To-Orbit Reusable Launch Vehicle Propulsion Alternatives. Air Force Institute of Technology, Wright- Patterson Air Force Base, Ohio, USA.
Philip CC (2000) An Entry Flight Controls Analysis for a Reusable Launch Vehicle.
Olds J, Bradford J, Charania A, Ledsinger L, McCormick D, et al. (1999) Hyperion: An SSTO Vision Vehicle Concept Utilizing Rocket-Based Combined Cycle Propulsion. 9th International Space Planes and Hypersonic Systems and Technologies Conference and 3rd Weakly Ionized Gases Workshop, USA.
Carter JP, Rachel JW, Corbin BJ, Block R (1993) Vehicle Management System for single stage rocket. AIAA, AHS, and ASEE, Aerospace Design Conference, Irvine, CA, USA.
Koelle DE (1993) Cost analysis for single-stage (SSTO) reusable ballistic launch vehicles. Acta Astronaut 30: 415-421.
John OR (1988) A conceptual design for a single-stage-to-orbit Space Station service vehicle. AIAA Aerospace Sciences Meeting, NV, USA.
Ivan B (1994) SSTO rockets. A practical possibility. Aerospace America 32: 32- 37.
Nguyen HN (1987) Trajectory characteristics of horizontal takeoff single stage to orbit vehicle. AIAA, Aerospace Sciences Meeting, NV, USA.
John OR, Anne LL, Edward BJ, Ashraf C, Jeremy MD, et al. (1999) Stargazer: A TSTO Bantam-X Vehicle Concept Utilizing Rocket-Based Combined Cycle Propulsion. 9th International Space Planes and Hypersonic Systems and Technologies Conference Norfolk, USA.
Tanatsugu N, Lo RE, Manski D, Schoettle UM (1986) A study on two-stage launcher with air-breathing propulsion. Space exploitation and utilization; Proceedings of the Symposium, Honolulu, HI, USA.
Berry W, Grallert H (1996) Performance and technical feasibility comparison of reusable launch systems: A synthesis of the ESA winged launcher studies. Acta Astronaut 38: 333-347.
David GB, John OR, James M, Douglas NK, John WE, et al. (2001) Starsaber: A Small Payload-Class TSTO Vehicle Concept Utilizing Rocket-Based Combined Cycle Propulsion. 37th AIAA/ASME/SAE/ASEE Joint Propulsion Conference And Exhibit Salt Lake City, UT, USA.
Wayne BJ, Alonzo FL, Darren RK (2003) Stage Separation Wind Tunnel Tests of a Generic Two-Stage-to-Orbit Launch Vehicle. 21st AIAA Applied Aerodynamics Conference, USA.
Alain W, Alain D (1992) A generic fast airbreathing first stage TSTO vehicle- RADIANCE. AIAA, International Aerospace Planes Conference, USA.
Griffin MD, Claybaugh II WR (1996) On the economics of staging for reusable launch vehicles. AIP Conf Proc 361: 45-58.
Charania AC, John BE, John OR, Matthew G (2002) System Level Uncertainty Assessment for Collaborative RLV Design. 2nd JANNAF Modeling and Simulation Subcommittee Meetings, NASA.
Tsuchiya T, Mori T (2002) Multidisciplinary design optimization to future space transportation vehicles. AIAA.
Unal R, Stanley DO, Joyner CR (1993) Propulsion system design optimization using the Taguchi method.IEEE T Eng Manage 40: 315-322.
Yang WH, Tarng YS (1998) Design optimization of cutting parameters for turning operations based on the Taguchi method. J Mater Process Tech 84: 122-129.
Fujimoto K, Fujii K (2003) Computational Prediction of the Aerodynamic Characteristics of SSTO Vehicle Configurations. Inst Space Astronaut Sci Rep 682: 32.
Kassler TL (2000) Solar thermal OTV—Applications to reusable and expendable launch vehicles. Acta Astronaut 47: 215-226.
Shtessel YB, Zhu JJ, Daniels D (2002) Reusable launch vehicle attitude control using a time-varying sliding mode control technique. Proceedings of the Thirty- Fourth Southeastern Symposium on System Theory, USA.
Shaffer PJ, Ross IM (2005) Optimal Trajectory Recon guration and Retargeting for a Reusable Launch Vehicle. AIAA Guidance, Navigation, and Control Conference and Exhibit, California, USA.
Klevanski J, Sippel M (2003) Quasi-Optimal Control for the Reentry and Return Flight of an RLV. 5th International Conferece on Launcher Technology, Madrid, Spain.
