Telemetry in Civil Engineering

Authors

  • Pranav Harit Student, Department of Civil Engineering, Arya College of Engineering and Research Centre, Jaipur, Rajasthan, India.
  • Neha Chaudhary Assistant Professor, Department of Civil Engineering, Arya College of Engineering and Research Centre, Jaipur, Rajasthan, India.
  • Mukesh Saini Assistant Professor, Department of Civil Engineering, Arya College of Engineering and Research Centre, Jaipur, Rajasthan, India.

Keywords:

Telemetry, Surveyor, Wireless, Strain, Ultra Sonic, Infrared System

Abstract

In today’s world, various problems are arising with an increase in technology. In construction fields when there is some construction work being done then there are chances that some of the problems may arise in the project structure which may not be a healthy sigh to the building signs like the expansion of the portions of the building, Deformations formed in the structure due to various forces like tangential force in bolts in case of bolt screw, load point distortion due to transportation of the building structure. Thus the method of telemetry serves as a very useful constituent of modern field technology in present times. It is necessary to consider the anticipated structure load of a project. They are understood as forces that cause stress, deformations, and are applied to a structure or its components that cause stress or displacement. The collected data can be transferred without being in contact with the points which are accessible and their automatic transmission by the means of radio, infra-red, and ultrasonic system providing real-time data. This paper discusses the use of Telemetry in taking measurements in the civil engineering structure using a sensor system.

References

Andre R Gange, Magyseif El-Nasr, Chris D. A Deeper Look at the use of telemetry for Analysis of Paper.

PK Rahul Krishna, R Eshwari, N J Shree Harsha et al. Rajeshwari Hedge,design and development of remote load monitoring suitable for non-residential loads through wireless data transmission.

Mekid S, Bouhraoua A, Uthmanbaroudi. Batterylesswireless remote bolt tension monitoring system.

Segall N, Hobbs G, Granger CB et al. Patient load effects on response time to critical arrhythmias in cardiac telemetry: a randomized trial. Critical Care Medicine. 43(5): 1036–42. doi:10.1097/CCM.0000000000000923. PMC 6226252. PMID 25746509.

Marine Wildlife Telemetry. Pinniped Ecology Applied Research Laboratory. Archived from the original on 2012.

What Is Telemetry? Pinniped Ecology Applied Research Laboratory. Archived from the original on 2011.

Livezey KB. Toward the reduction of marking-induced abandonment of newborn ungulates. Wildlife Society Bulletin 1990; 18: 193-203.

Telemetry in the Mining Industry. IETE Journal of Research 1983; 29(8).

Operational Safety and Efficiency of Mobile Equipment through Operator Behavior Monitoring. Canadian Institute of Mining. 2015.

Rues, Gerald, MSEE, Remote Tank Monitoring Can Save Time and Money. March, 2019, Tank Transport, magazine. 2019.

Tank Sensors & Probes, Electronic Sensors, Inc., retrieved August 8, 2018.

Hopper H. A Dozen Ways to Measure Fluid Level and How They Work. December 1, 2018, Sensors Magazine, retrieved August 29, 2018.

Accurately Measuring Dry Bulk Solids. January 4, 2016, Powder-Bulk Solids magazine, retrieved April 8, 2019.

Dynamic Measurement and Simulation of Bulk Solids. Task Quarterly, 2003; 7(4): 611–621.

Published

2020-06-12