Quantifying Damping Characteristics: A Logarithmic Decrement Method for Evaluating Loss Factor of Aluminium Plates

Authors

  • Sachin Sarkar Assistant Professor, Civil Engg Department, Punjab University, India.
  • Prasanjeet Maurya Student, Civil Engg Department, Punjab University, India.

Keywords:

damping, viscoelastic material, constrained layer

Abstract

Excellent damping characteristics can be found in viscoelastic materials. The subject of damping is the material's ability to dissipate energy. Materials that are viscoelastic are utilised to reduce vibration. Viscoelastic material may be applied to the metal plate as free and limited layer damping. First, two aluminium structures were built using free and limited layer damping. The loss factor for both of the structures is then calculated using the logarithmic decrement method. The results show that the loss factor of the structure with limited layer damping is higher than the loss factor of the structure with free layer damping.Another thing that has been seen is that as the material's thickness increases and as the natural frequencies decrease, the viscoelastic material's capacity to dampen vibrations gets better.

References

Pastia C., Lucas S. G., Chira F., and Rosca V. O.2005. Structural control systems implemented in civil engineering.Construct II. Arhitectura.

Sharnappa, Ganesan N. and SethuramanRaju. 2009.Buckling and free vibration analysis of magnetic constrained layer damping (MCLD) beam. Finite Elements in Analysis and Design. 45: 156 – 162.

Sher B.R. and Moreira R.A.S.2013. Dimensionless analysis of constrained damping treatments. Composite Structures. 99: 241–254.

Stevenson J.D. 1980.Structural damping values as a function of dynamic response stress and deformation levels. Nuclear Engineering and Design. 60: 211-237.

Sung Yi, Shih Fu Ling and Ming Ying. 1998.Finite element analysis of composite structures with smart constrained layer damping. Advances in Engineering Software.Vol. 29: No. 3–6: 265–271.

Tongue Benson H.2002. Principles of vibratio. Oxford University Press.

VasquesC.M.A., Mace B.R., GardonioP. and Rodrigues J. Dias. 2006.Arbitrary active constrained layer damping treatments on beams: Finite element modelling and experimental validation. Computers and Structures. 84: 1384–1401.

Xiang Yu, Yuan Liyun, Huang Yuying and QiaoNi.2011. A novel matrix method for coupled vibration and damping effect analyses of liquid-filled circular cylindrical shells with partially constrained layer damping under harmonic excitation. Applied Mathematical Modelling. 35: 2209–2220.

Xin-Jin Dai, Jia-Hao Lin, Hao-Ran Chen and Williams F.W. 2008.Random vibration of composite structures with an attached frequency-dependent damping layer. Composites: Part B. 39: 405–413.

Yinming Shi, HongxingHua and Hugo Sol. 2004. The finite element analysis and experimental study of beams with active constrained layer damping treatments. Journal of Sound and Vibration. 278: 343–363.

Yuh-Chun Hu and Shyh-Chin Huang.2000.The frequency response and damping effect of three-layer thin shell with viscoelastic core.Computers and Structures. 76: 577-591

Published

2023-08-08