A Review of Meta-materials: Classification, Types and its Applications
Keywords:
Left Handed Media (LHM), Split Ring Resonator (SRR), Single Negative Material (SNG), Double Negative Material (DNG) and Electromagnetic Band Gap (EBG)Abstract
Meta-materials are one of the most significant and interesting topics for the Electromagnetic field since past few years. It is artificially invented materials that shows the unique and magnificent properties which are not detected in easily occurring materials. These materials have negative permittivity and permeability. Use of metamaterials in different antenna constructing and fabrication greatly enhances the antenna parameters such as gain, directivity,
radiated power, productivity and bandwidth etc. In this paper we present a review of classification, various types of meta-materials, their applications and advantages.
How to cite this article:
Valate PS, Mathpati MS. A Review of Metamaterials: Classification, Types and its Applications. J Adv Res Nanosci Nanotech 2020; 2(2): 1-5
References
Gangwar A, Gupta SC. Metamaterials-A New Era of
Artificial Materials with Extraordinary Properties.
International Journal of Engineering Research &
Management Technology 2014; 1(2). ISSN: 2348-4039.
Pandey A, Rana SB. Review of Metamaterials, Types
and Design Approaches. An International Journal of
Engineering Sciences 2016; 17. ISSN: 2229-6913.
Gangwar K, Paras, Gangwar RPS. Metamaterials:
Characteristics, Process and Applications. Advance in
Electronic and Electric Engineering. 2014; 4(1): 97-106.
ISSN 2231-1297,
Mendhe SE, Kosta YP. Metamaterial Properties And
Applications. International Journal of Information
Technology and Knowledge Management 2011; 4(1):
-89.
Singh G, Marwaha RA. A Review of Metamaterials and
its Applications. International Journal of Engineering
Trends and Technology (IJETT) 2015; 19. ISSN: 22315381.
Divyashree J, Bhalare A, Shivananda et al. Design and
Development of Metamaterial Antennas on different
Substrates for its Performance Evaluation. Antenna
Test & Measurement Society (ATMS India-18), 2018.
Thomas AS, Prakash AK. A Survey on Microstrip Patch
Antenna using Metamaterial. International Journal
of Advanced Research in Electrical, Electronics and
Instrumentation Engineering 2013; 2(12). ISSN: 2320–
Khushnuma P. Metamaterials: Types, applications,
development and future scope. International Journal of
Advance Research, Ideas and Innovations in Technology
(3). ISSN: 2454-132X Impact factor: 4.295.
Kumar M, Kumar M. Analysis of Meta-materials – for
its Different Properties and Areas of Applications.
International Journal of Engineering Research &
Technology (IJERT) 2015; 4(3). ISSN: 2278-0181.
Bougoutaia T, Khedrouche D, Hocini A. Bandwidth
Improvement for Compact Micro strip Patch Antenna
Using Meta-materials, ACTA PHYSICA POLONICA A
; 129: 2016.
Park S, Kim C, Jung Y et al. Gain enhancement of a
micro strip patch antenna using a circularly periodic
EBG structure and air layer. International Journal of
electronics and communications. 2009.
Adlina S, Md Ali, Abu M et al. A Review: The Development
of Metamaterial Absorbe. International Journal of
Integrated Engineering 2020; 12(1): 72–80.
Rahmani E, Sharma PK. Applications of Metamaterials:
A Review. Our Heritage 2020; 68(30). ISSN: 0474-9030.
Published
Issue
Section
Copyright (c) 2020 Journal of Advanced Research in NanoScience and NanoTechnology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
We, the undersigned, give an undertaking to the following effect with regard to our article entitled
“_______________________________________________________________________________________________________________________________________________________________________________
________________________________________________________________________________” submitted for publication in (Journal title)________________________________________________ _______________________________________________________Vol.________, Year _________:-
1. The article mentioned above has not been published or submitted to or accepted for publication in any form, in any other journal.
2. We also vouchsafe that the authorship of this article will not be contested by anyone whose name(s) is/are not listed by us here.
3. I/We declare that I/We contributed significantly towards the research study i.e., (a) conception, design and/or analysis and interpretation of data and to (b) drafting the article or revising it critically for important intellectual content and on (c) final approval of the version to be published.
4. I/We hereby acknowledge ADRs conflict of interest policy requirement to scrupulously avoid direct and indirect conflicts of interest and, accordingly, hereby agree to promptly inform the editor or editor's designee of any business, commercial, or other proprietary support, relationships, or interests that I/We may have which relate directly or indirectly to the subject of the work.
5. I/We also agree to the authorship of the article in the following sequence:-
Authors' Names (in sequence) Signature of Authors
1. _____________________________________ _____________________________________
2. _____________________________________ _____________________________________
3. _____________________________________ _____________________________________
4. _____________________________________ _____________________________________
5. _____________________________________ _____________________________________
6. _____________________________________ _____________________________________
7. _____________________________________ _____________________________________
8. _____________________________________ _____________________________________
Important
(I). All the authors are required to sign independently in this form in the sequence given above. In case an author has left the institution/ country and whose whereabouts are not known, the senior author may sign on his/ her behalf taking the responsibility.
(ii). No addition/ deletion/ or any change in the sequence of the authorship will be permissible at a later stage, without valid reasons and permission of the Editor.
(iii). If the authorship is contested at any stage, the article will be either returned or will not be
processed for publication till the issue is solved.
