Innovative and unique generative design solution for the leg part of a robot using Autodesk Fusion 360 CAD software
Keywords:
Parametric modeling, generative design analysis, Autodesk Fusion 360, novel, CAD/CAM – computer aided design and computer-Aided manufacturing.Abstract
Generative design is the innovative and novel feature of Fusion 360. As AI has become a common and compulsory tool in every search engine, the concept of generative design has also been for the designing software, to generate optimum models of designs. To showcase the concept above, in this paper four best outcomes of the generative design of the leg-2 have been discussed with tabular, pictorial, and graphical analysis. Leg-2 is the name given to the component of one of the glass cleaning robots. This paper will also show how a design is being optimized through multiple iterations, about the structural load and other constraints. For all four case studies/outcomes mass, stress and displacement analysis is presented graphically with respect to different types of materials. The results of these case studies are found within the critical yield strength values of respective material along with mass optimization through generative design analysis.
References
Prasad Umakant Bhad, Rajesh B. Buktar, “Multiple novel generative design solutions for various mechanical engineering related products using Autodesk Fusion 360 software ,”, Andheri, Mumbai – 400058, India.
ZHENJING LI, QINGSONG XU, “A Survey on Techniques and Applications of Window-Cleaning Robots ”, IEEE Access, University of Macau, Macau, China.
Francesco Buonamici1, Monica Carfagni1, Rocco Furferi1, Yary Volpe1 and Lapo Governi1, “ Generative Design: An Explorative Study ”, Department of Industrial Engineering of Florence.
Schrurs, Sébastien, “ Contributions of Generative Design tools to Mechanical Design ”, Mechanical Engineering.
N. Srinivasan, Aritra Sanyal, Tanishq Bheda, Leo Harshwardhan; Design development and optimization of disc brake using generative design on fusion 360. AIP Conf. Proc. 11 October 2022; 2653 (1): 020016.
Prashil Raj Shrestha, Dipak Timalsina, Sabal Bista, Bim Prasad Shrestha, Tejesh Man Shakya; Generative design approach for product development. AIP Conf. Proc. 15 September 2021; 2397 (1): 020008.
Shrestha, Prashil Raj, et al. "Generative design approach for product development." AIP Conference Proceedings. Vol. 2397. No. 1. AIP Publishing, 2021.
Junk, Stefan, and Lukas Burkart. "Comparison of CAD systems for generative design for use with additive manufacturing." Procedia CIRP 100 (2021): 577-582.
Buonamici, F., Carfagni, M., Furferi, R., Volpe, Y., & Governi, L. (2020). Generative design: an explorative study. Computer-Aided Design and Applications, 18(1), 144-155.
Timmis, Harold, and Harold Timmis. "Modeling with Fusion 360." Practical Arduino Engineering: End to End Development with the Arduino, Fusion 360, 3D Printing, and Eagle (2021): 57-127.
Mahto, H. K., Pandey, N., Mahalik, V., Shrivastava, A., Pandey, A., Tewari, P., ... & Gupta, P. DESIGN AND ANALYSIS OF THE COMPONENT OF GLASS CLEANING ROBOT USING GENERATIVE DESIGNING MODULE.
Published
Issue
Section
Copyright (c) 2023 Journal of Engineering Design and Analysis
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
We, the undersigned, give an undertaking to the following effect with regard to our article entitled
“_______________________________________________________________________________________________________________________________________________________________________________
________________________________________________________________________________” submitted for publication in (Journal title)________________________________________________ _______________________________________________________Vol.________, Year _________:-
1. The article mentioned above has not been published or submitted to or accepted for publication in any form, in any other journal.
2. We also vouchsafe that the authorship of this article will not be contested by anyone whose name(s) is/are not listed by us here.
3. I/We declare that I/We contributed significantly towards the research study i.e., (a) conception, design and/or analysis and interpretation of data and to (b) drafting the article or revising it critically for important intellectual content and on (c) final approval of the version to be published.
4. I/We hereby acknowledge ADRs conflict of interest policy requirement to scrupulously avoid direct and indirect conflicts of interest and, accordingly, hereby agree to promptly inform the editor or editor's designee of any business, commercial, or other proprietary support, relationships, or interests that I/We may have which relate directly or indirectly to the subject of the work.
5. I/We also agree to the authorship of the article in the following sequence:-
Authors' Names (in sequence) Signature of Authors
1. _____________________________________ _____________________________________
2. _____________________________________ _____________________________________
3. _____________________________________ _____________________________________
4. _____________________________________ _____________________________________
5. _____________________________________ _____________________________________
6. _____________________________________ _____________________________________
7. _____________________________________ _____________________________________
8. _____________________________________ _____________________________________
Important
(I). All the authors are required to sign independently in this form in the sequence given above. In case an author has left the institution/ country and whose whereabouts are not known, the senior author may sign on his/ her behalf taking the responsibility.
(ii). No addition/ deletion/ or any change in the sequence of the authorship will be permissible at a later stage, without valid reasons and permission of the Editor.
(iii). If the authorship is contested at any stage, the article will be either returned or will not be
processed for publication till the issue is solved.
