Indoor Air Quality Based Economizer and Energy Recovery Wheel Trainer Construction

Authors

  • Avesahemad SN Husainy Assistant Professor, Department of Mechanical Engineering, Sharad Institute of Technology College of Engineering, Yadrav, Kolhapur, Maharashtra, India.
  • Rupesh S Ingale Research Scholar, Department of Mechanical Engineering, Sharad Institute of Technology College of Engineering, Yadrav, Kolhapur, Maharashtra, India. https://orcid.org/0000-0001-6065-539X
  • Snehal P Mali Research Scholar, Department of Mechanical Engineering, Sharad Institute of Technology College of Engineering, Yadrav, Kolhapur, Maharashtra, India.
  • Nilprabha N Yadav Research Scholar, Department of Mechanical Engineering, Sharad Institute of Technology College of Engineering, Yadrav, Kolhapur, Maharashtra, India.
  • Harshad D Ganthade Research Scholar, Department of Mechanical Engineering, Sharad Institute of Technology College of Engineering, Yadrav, Kolhapur, Maharashtra, India.
  • Atharv A Ganbavale Research Scholar, Department of Mechanical Engineering, Sharad Institute of Technology College of Engineering, Yadrav, Kolhapur, Maharashtra, India.

Abstract

Indoor Air Quality is one of the important factors in heating, ventilation, and air conditioning industry. In the many years as growing, industrialisation and scientific researches have indicated that the air within the indoor air can be more seriously polluted than the outdoor
air. In recent years, pollution caused by indoor decoration has become more and more serious. As most people spend about 90% of their time indoors, the influence of indoor air contamination is long-termed and consecutive. There are many indoor toxicants can potentially cause and lead to a variety of health diseases like as dysesthesia, mental health
issue, transient morbidity, disability and even death in extreme cases. Also, it gives birth to new viruses, germs that cause human being. For this condition, we are using the economizer trainer and the purge wheel for the betterment of the indoor air quality and improve efficiency. The energy recovery wheel plays an important roll in this indoor air quality based economizer by using the filtration like odour filtration and gas-phase filtration we can control the chemical component and odour in the air quality.

How to cite this article: Husainy ASN, Ingale RS, Mali SP et al. Indoor Air Quality Based Economizer and Energy Recovery Wheel Trainer Construction. J Adv Res Appl Mech Compu Fluid Dyna 2020; 7(3&4): 6-12.

DOI: https://doi.org/10.24321/2349.7661.202004

References

Zhai J, Yu J, Kang Y. Advances in research for underground buildings: Energy, thermal comfort and indoor air quality. Energy and Buildings 2020; 109916.

Cincinelli A, Martellini T. Indoor air quality and health 2017.

Jani DB, Mshra M, Sahoo PK. Performance analysis of a solid desiccant assisted hybrid space cooling system using TRNSYS, J. Build. Eng. 2018; 19: 26-35. doi:10.1016/J.JOBE.2018.04.016.

Motaghian S, Pasdarshahri H. Regeneration energy analysis and optimization in desiccant wheels using purge mechanism.Journal of Building Engineering 2020; 27: 100980.

Simonson CJ. Heat and mass transfer in energy wheels, PhD Thesis, University of Saskatchewan, Saskatoon, Canada, 1998.

Ruan W, Qu M, Horton WT. Modeling analysis of an enthalpy recovery wheel with purge air. International journal of heat and mass transfer 2012; 55(17-18): 4665-4672.

Brandemuehl MJ, Braun JE. The impact of demand-controlled and economizer ventilation strategies on energy use in buildings ASHRAE Transactions 1999; 105: 39.

Zhai J, Yu J, Kang Y. Advances in research for underground buildings: Energy, thermal comfort and indoor air quality. Energy and Buildings 2020; 109916.

Motaghian S, Pasdarshahri H. Regeneration energy analysis and optimization in desiccant wheels using purge mechanism. Journal of Building Engineering 2020; 27: 100980.

Jones B, Molina C. 2017. Indoor air quality.

Sarigiannis DA. Indoor Air Quality Indicators. In Environmental Indicators. Springer, Dordrecht 2015: 827-841.

Published

2020-11-06

Issue

Vol. 7 No. 3&4 (2020): Journal of Advanced Research in Applied Mechanics and Computational Fluid Dynamics

Section

Review Article