Study of Blast Furnace Stave Cooler Based on Heat Transfer Analysis
Keywords:
Blast Furnace, Stave Cooling, Transfer Analysis, High ThermalAbstract
The life of blast furnace is increase due to technology of furnace cooling very important method for metallurgical industry. Blast furnace mathematical model of stave cooler has been developed for heat transfer analysis and compare to experimental. Using ANSYS® software calculating the heat transfer and temperature of stave cooler. The result calculating using software ANSYS® and compare with blast furnace placed in RSP with experimental model. Heat transfer stave cooling of blast furnace has been done at different temperature from 575k to 1675k the result is compare with experimental for better result, in the stave cooling of blast furnace nitrogen and nano fluid (Al2O3) also as a cooling fluid in the place of water.
References
1. Changko Y., Kenho K., and Tangkuo H., The Thermal Behavior Analysis in Tap-Hole Area, China Steel Technical Report, No. 21,(2008), pp.13-20.
2. Shrivastava A. and Himte R.L., Computational Study of Blast Furnace Cooling Stave using Heat Transfer Analysis, International Journal of Innovative Technology and Exploring Engineering , Volume-1, (2012), ISSN: 2278-3075.
3. Kumar A., Bansal S., and Chandraker R., Computational modeling of blast furnace cooling stave based on heat transfer analysis, Materials Physics and Mechanics ,volume15, (2012), pp.46-65.
4. Lijun W., Xun X., Weiguo Z., Yunlong S. and Xiaojing L., Heat transfer analysis of blast furnace stave, International Journal of Heat and Mass Transfer,volume51 ,(2008) ,pp.2824–2833.
5. Lijun W., Weiguo Z., Peng L. and Huier C., Study on the equivalent convection coefficient of the hot surface of blast furnace stave, Heat Mass Transfer ,volume43, (2007),pp.1303–1309.
6. Lijun W., Zuan L., Guoping S. and Jing.Z., Study on intelligent monitoring methodology based on the mathematical model of heat transfer for blast furnace stave, Applied Mathematical Modeling, volume 34 ,(2010) ,pp.2129–2135.
7. Verscheure K., Kyllo A.K., Filzwieser A., Blanpain B. and Wollants P., Furnace cooling technology in pyrometallurgical Processes, Sohn International Symposium Advanced processing of metals and materials,volume 4,(2006).
8. Pückoff U. and knoche C., Development of improved plate coolers(staves) for blast furnaces, DirectorateGeneral Science, Research and Development,(1986).
2. Shrivastava A. and Himte R.L., Computational Study of Blast Furnace Cooling Stave using Heat Transfer Analysis, International Journal of Innovative Technology and Exploring Engineering , Volume-1, (2012), ISSN: 2278-3075.
3. Kumar A., Bansal S., and Chandraker R., Computational modeling of blast furnace cooling stave based on heat transfer analysis, Materials Physics and Mechanics ,volume15, (2012), pp.46-65.
4. Lijun W., Xun X., Weiguo Z., Yunlong S. and Xiaojing L., Heat transfer analysis of blast furnace stave, International Journal of Heat and Mass Transfer,volume51 ,(2008) ,pp.2824–2833.
5. Lijun W., Weiguo Z., Peng L. and Huier C., Study on the equivalent convection coefficient of the hot surface of blast furnace stave, Heat Mass Transfer ,volume43, (2007),pp.1303–1309.
6. Lijun W., Zuan L., Guoping S. and Jing.Z., Study on intelligent monitoring methodology based on the mathematical model of heat transfer for blast furnace stave, Applied Mathematical Modeling, volume 34 ,(2010) ,pp.2129–2135.
7. Verscheure K., Kyllo A.K., Filzwieser A., Blanpain B. and Wollants P., Furnace cooling technology in pyrometallurgical Processes, Sohn International Symposium Advanced processing of metals and materials,volume 4,(2006).
8. Pückoff U. and knoche C., Development of improved plate coolers(staves) for blast furnaces, DirectorateGeneral Science, Research and Development,(1986).
Published
2019-01-08
How to Cite
Azad, P. K., & Singh, M. (2019). Study of Blast Furnace Stave Cooler Based on Heat Transfer Analysis. Journal of Advanced Research in Mechanical Engineering and Technology, 5(1&2), 40-44. Retrieved from https://adrjournalshouse.com/index.php/mechanical-engg-technology/article/view/268
Issue
Section
Research Article
