A Review on Influence of Varying Process Parameters on Plasma Arc Cutting Process
Keywords:
PAC, MRR, Stand off Distance (SOD)Abstract
Now days, Plasma Arc Cutting (PAC) is becoming one of the best Non Traditional method for performing number of complex operations upto a high extent of accuracy and productivity. In order to maintain this high level of productivity process parameters plays a vital role. In this paper, we are reviewing the research done by different researchers on different process parameters of Plasma Arc Cutting (PAC), which actually concludes the influence of different process parameters on the Material Removal Rate (MRR) using different materials.
References
1. A.P .Hoult, I.R. Pashby, K. Chan, “Fine plasma cutting of advanced aerospace materials”,48 (1995) 825-831.
2. Begic, D[erzija]; Kulenovic, M[alik]; Cekic, A[hmet] & Dedic, E*Idin+,“Some Experimental Studies on Plasma Cutting Quality of Low Alloy Steel”, Vol.23 (2012).
3. Bogdan Nedic, Marko Janakovik, Miroslav Radovanovik, Gordana Globocki Lakic,“Quality of Plasma Cutting”, kragujevak, Serbia, 15 (2013) 314-319.
4. E.Gariboldi, B. Previtali, “High Tolerance Plasma Arc Cutting Of Commercially Pure Titanium”, Journal Of Materials Processing Technology, 160 (2005) 77-89.
5. Jainish A. Patel, “Experimental Investigation on Effect of Plasma Arc Cutting on SS304 by Full Factorial Design”, International Journal of Engineering Innovation and Research, Vol.4 (2015) 361-364.
6. K.P. Maity, Dilip Kumar Bagal, “Effect of Process Parameters on Cut Quality of stainless steel of plasma arc cutting using hybrid approach”, Int J Adv Manuf Technol (2014).
7. K. Salonitis, S. Vatousianos, “Experimental Investigation of Plasma Arc Cutting Process”, Procedia CIRP 3(2012) 287-292.
8. Milan Kumar Das , Kaushik Kumar, Tapan Kr Barman, Prasanta Sahu, “ Optimization of Process Parameters in Plasma Arc Cutting EN 31 steel based on MRR and Multiple Roughness Characteristics using Grey relational analysis”, Procedia material science, 5 (2014) 1550-1559.
9. Nishant Sharma, “study of process parameters in plasma arc machining process” dspace.thapar. edu:8080/jspui/bitstream/10266/1630/1/Nishant%20 sharma%20pdf.pdf
10. R. Bini, B.M. Colosimo, A.E. Kutlu, M. Monno, “Experimental study of the future of the kerf generate by 20A”, I96 (2008) 345-355.
11. Subbarao Chamarthia, N. Sinivasa Reddyb, Manoj Kumar Elipeyc, D.V. Ramana Reddy, “Investigation Analysis of Plasma Arc Cutting Parameters on the unevenness surface of Hardox-400 material”, Procedia Engineering vol.64 (2013) 854-861.
12. S Ramakrishnan, V Shrinet, F B Polivka, T N Kearney, P Koltun, “Influence of gas composition on Plasma Arc Cutting of Mild Steel”, 33(2000) 2288-2299.
13. Valerian A Nemchinsky, “Plasma flow in nozzle during plasma arc cutting”, vol.31 (1998) 3102-3107.
14. Vivek Singh, “Analysis of process parameters of plasma arc cutting using design of experiment” ethesis.nitrkl. ac.in/4078/1/Combine_Thesis.pdf
15. W.J. Xu, J.C. Fang, Y.S. Lu, “Study on ceramic cutting by plasma arc”, vol.129 (2002) 152-156.
2. Begic, D[erzija]; Kulenovic, M[alik]; Cekic, A[hmet] & Dedic, E*Idin+,“Some Experimental Studies on Plasma Cutting Quality of Low Alloy Steel”, Vol.23 (2012).
3. Bogdan Nedic, Marko Janakovik, Miroslav Radovanovik, Gordana Globocki Lakic,“Quality of Plasma Cutting”, kragujevak, Serbia, 15 (2013) 314-319.
4. E.Gariboldi, B. Previtali, “High Tolerance Plasma Arc Cutting Of Commercially Pure Titanium”, Journal Of Materials Processing Technology, 160 (2005) 77-89.
5. Jainish A. Patel, “Experimental Investigation on Effect of Plasma Arc Cutting on SS304 by Full Factorial Design”, International Journal of Engineering Innovation and Research, Vol.4 (2015) 361-364.
6. K.P. Maity, Dilip Kumar Bagal, “Effect of Process Parameters on Cut Quality of stainless steel of plasma arc cutting using hybrid approach”, Int J Adv Manuf Technol (2014).
7. K. Salonitis, S. Vatousianos, “Experimental Investigation of Plasma Arc Cutting Process”, Procedia CIRP 3(2012) 287-292.
8. Milan Kumar Das , Kaushik Kumar, Tapan Kr Barman, Prasanta Sahu, “ Optimization of Process Parameters in Plasma Arc Cutting EN 31 steel based on MRR and Multiple Roughness Characteristics using Grey relational analysis”, Procedia material science, 5 (2014) 1550-1559.
9. Nishant Sharma, “study of process parameters in plasma arc machining process” dspace.thapar. edu:8080/jspui/bitstream/10266/1630/1/Nishant%20 sharma%20pdf.pdf
10. R. Bini, B.M. Colosimo, A.E. Kutlu, M. Monno, “Experimental study of the future of the kerf generate by 20A”, I96 (2008) 345-355.
11. Subbarao Chamarthia, N. Sinivasa Reddyb, Manoj Kumar Elipeyc, D.V. Ramana Reddy, “Investigation Analysis of Plasma Arc Cutting Parameters on the unevenness surface of Hardox-400 material”, Procedia Engineering vol.64 (2013) 854-861.
12. S Ramakrishnan, V Shrinet, F B Polivka, T N Kearney, P Koltun, “Influence of gas composition on Plasma Arc Cutting of Mild Steel”, 33(2000) 2288-2299.
13. Valerian A Nemchinsky, “Plasma flow in nozzle during plasma arc cutting”, vol.31 (1998) 3102-3107.
14. Vivek Singh, “Analysis of process parameters of plasma arc cutting using design of experiment” ethesis.nitrkl. ac.in/4078/1/Combine_Thesis.pdf
15. W.J. Xu, J.C. Fang, Y.S. Lu, “Study on ceramic cutting by plasma arc”, vol.129 (2002) 152-156.
Published
2019-01-08
Issue
Section
Review Article
