Effect of Tool Pin Profiles on the Tensile Strength of Friction Stir Welded AA6082-T6 Similar Joints
Keywords:
Friction Stir Welding, Aluminium alloys, Tensile Testing, Tool geometriesAbstract
In this investigation, an attempt has been made to analyze the Tensile strength of similar joints Friction Stir Welded AA 6082 alloy plates under different tool pin geometries. The tool pin geometries used in this investigation were triangular, circular and hexagonal. It was observed that for triangular, hexagonal and circular tool pin profile, maximum tensile strength was 83 MPa, 82.1 MPa and 78.2 MPa at tool rotational speed of 1200 rpm.
References
1. Mishra, A., 2018. Friction Stir Welding Of Dissimilar Metal: A Review.
2. Leonardo N. Tufaro, Ivan Manzoni, Hernan G. Svoboda, Effect of Heat Input on AA5052 Friction Stir Welds Characteristics, Procedia Materials Science. 8 ( 2015 ) 914 – 923.
3. K. K. Ramachandran, N. Murugan, S. Shashi kumar, Tool Design Friction Stir Welding of Aluminum Alloy AA5052and HSLA Steel, Welding Journal. 94 ( 2015 ) 291 – 300.
4. K. Elangovan, V. Balasubramanian, Influence of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy, Journal of Materials Processing Technology. 200 (2008) 163-175. 5. P. Prasanna, C. H. Penchalayya, D. Anandamohana Rao, Effect of tool pin profiles and heat treatment process in the friction stir welding of AA 6061 aluminium alloy, American Journal of Engineering Research. 2 (2013) 7-15. 6. S. M. Bayazid, H. Farhangi, A. Ghahramani, Effect of Pin Profile on Defects of Friction Stir Welded 7075 Aluminum Alloy, Procedia Materials Science. 11 ( 2015 ) 12 – 16.
7. D. Venkateswarlu, N. R. Mandal, M. M. Mahapatra, S. P. Harsh, Tool Design Effects for FSW of AA7039, Welding Journal. 92 (2013) 41 – 47.
8. S. Ugender, A. Kumar, A. Somi Reddy, Experimental investigation of tool geometry on mechanical properties of friction stir welding of AA 2014 aluminium alloy, Procedia Materials Science. 5 (2014) 824-831.
9. Mishra, A. and Sharma, K., Abhishek, Analysis of Heat Generation During Friction Stir Processing of Aluminium Similar Joints (December 27, 2017).
10. Friction Stir Welding for Beginners, Akshansh Mishra, 2018
11. Mishra, A. and Rose, R., A & Singh, Anand & M, Saravanan.(2017). DESIGNING AND FABRICATION OF FIXTURE FOR FRICTION STIR WELDING OF ALUMINIUM AA6061 ALLOYS.. 10.13140/RG. 2.2, 33858.
2. Leonardo N. Tufaro, Ivan Manzoni, Hernan G. Svoboda, Effect of Heat Input on AA5052 Friction Stir Welds Characteristics, Procedia Materials Science. 8 ( 2015 ) 914 – 923.
3. K. K. Ramachandran, N. Murugan, S. Shashi kumar, Tool Design Friction Stir Welding of Aluminum Alloy AA5052and HSLA Steel, Welding Journal. 94 ( 2015 ) 291 – 300.
4. K. Elangovan, V. Balasubramanian, Influence of tool pin profile and welding speed on the formation of friction stir processing zone in AA2219 aluminium alloy, Journal of Materials Processing Technology. 200 (2008) 163-175. 5. P. Prasanna, C. H. Penchalayya, D. Anandamohana Rao, Effect of tool pin profiles and heat treatment process in the friction stir welding of AA 6061 aluminium alloy, American Journal of Engineering Research. 2 (2013) 7-15. 6. S. M. Bayazid, H. Farhangi, A. Ghahramani, Effect of Pin Profile on Defects of Friction Stir Welded 7075 Aluminum Alloy, Procedia Materials Science. 11 ( 2015 ) 12 – 16.
7. D. Venkateswarlu, N. R. Mandal, M. M. Mahapatra, S. P. Harsh, Tool Design Effects for FSW of AA7039, Welding Journal. 92 (2013) 41 – 47.
8. S. Ugender, A. Kumar, A. Somi Reddy, Experimental investigation of tool geometry on mechanical properties of friction stir welding of AA 2014 aluminium alloy, Procedia Materials Science. 5 (2014) 824-831.
9. Mishra, A. and Sharma, K., Abhishek, Analysis of Heat Generation During Friction Stir Processing of Aluminium Similar Joints (December 27, 2017).
10. Friction Stir Welding for Beginners, Akshansh Mishra, 2018
11. Mishra, A. and Rose, R., A & Singh, Anand & M, Saravanan.(2017). DESIGNING AND FABRICATION OF FIXTURE FOR FRICTION STIR WELDING OF ALUMINIUM AA6061 ALLOYS.. 10.13140/RG. 2.2, 33858.
Published
2019-01-08
Issue
Section
Research Article
